stations. After selecting the desired setting, press
“SET/ PRE/ M+” (4) to select your pre-set frequency to enjoy
radio broadcasting. Hold down amd press the
“AM/ FM/ ON/ OFF” (1) to turn off the radio.
ALARM FUNCTION
SETTING ALARM 1 BY BUZZER
In clock display mode, press
“AL 1/ VOL-” (5) button once to select alarm by buzzer, the “BUZZER AL1” icon will
light up and alarm time display will flash. Using
“HOUR/ TU-” (2) or “MIN/ TU+” (3) to set your desired alarm
hour.
SETTING ALARM 2 BY BUZZER
In clock display mode, press
“AL 2/ VOL+” (6) button once to select alarm by buzzer, the “BUZZER AL2” icon will
light up and alarm time display will flash. Using
“HOUR/ TU-” (2) or “MIN/ TU+” (3) to set your desired alarm
hour.
SETTING ALARM 1 BY RADIO
In clock display mode, press
“AL 1/ VOL-” (5) button twice to select alarm by radio, the “RADIO AL1” icon will
light up and alarm time display will flash. Using
“HOUR/ TU-” (2) or “MIN/ TU+” (3) to set your desired alarm
hour.
SETTING ALARM 2 BY RADIO
In clock display mode, press
“AL 2/ VOL+” (6) button twice to select alarm by radio, the “RADIO AL2” icon will
light up and alarm time display will flash. Using
“HOUR/ TU-” (2) or “MIN/ TU+” (3) to set your desired alarm
hour.
SLEEP FUNCTION
If you want to listen to the radio while falling asleep, you can use the sleep function by setting the sleep time.
With the radio on, press the “SLEEP / SNOOZE” (7) button to enter into sleep mode, the 90 no. shows on the
LED Display (8). It states 90-MINUTES- of sleep time and must be set in sequence 90-80-70-60-50-40-30-20-
10-
OFF. Press the “SLEEP/ SNOOZE” (7) button to choose your desired sleep time, the sleep timer will change
by 10 minutes each time you press the “SLEEP” (7) button. The radio will stop playing when the timer
countdowns from the pre-set sleep time to the end and then switch off by itself.
SNOOZE FUNCTION
On alarm sound mode, press
“AM/ FM/ ON/ OFF” (1) to stop the alarm, the alarm will not resume. But if you
press the “SLEEP/ SNOOZE” (7) button to stop the alarm, the “AL” icon of the LED display (8) will blink, and the
alarm will resume after 9 minutes.
CLEANING AND STORING
•
Always unplug the unit from the wall outlet and remove the backup battery first before cleaning.
•
Clean the unit, panel and controls with a slightly damp soft cloth. Do not use liquid cleaners, aerosol
cleaners, solvents such as benzene or strong chemical cleaners, since this could damage the finish of
the unit.
