PXM PX292, Руководство пользователя, Страница: 5 / 34

2 Safety conditions
PX292 is a device powered by low voltage equal to 12 – 24V DC; however,
please observe the following safety rules during its installation and use:
1. The device mat be connected to 12 – 24V DC with current-carrying
capacity compatible with technical data.
2. All the conductors should be protected against mechanical and
thermal damage.
3. In the event of damaging any conductor, it should be replaced with
a conductor of the same technical data.
4. Only use a shielded cable for connecting the DMX signal.
5. All repairs and connection of outputs or DMX signal can only be made
with cut off power supply.
6. PX292 should be strictly protected against contact with water and
other liquids.
7. All sudden shocks, particularly dropping, should be avoided.
8. The device cannot be turned on in places with humidity exceeding
90%.
9. The device cannot be used in places with temperature lower than +2°C
or higher than +40°C.
10. Clean with damp cloth only – when the power is off.
5