PXM PX292, Руководство пользователя, Страница: 13 / 34

Available parameters:
• Lin – linear characteristic 4 – 20mA,
•
S_P – switching characteristic (on / off),
• uSr – user-defined characteristic, linear, ranging from Min to Max . The
minimum and maximum values can be set in the range from 4 to
20mA.
ENTER
3 x NEXT
NEXT
ENTER ENTER
NEXT
NEXT
ENTER
NEXT
ENTER
NEXT
NEXT
NOTE! Information whether the device is the L0 version is displayed during
device start-up.
4.5 Response to the loss of DMX signal
This function is used both to protect the system against the
disappearance of DMX signal and to gain a specific state on outputs. After it
has been activated, in case of a lack of DMX signal, the module will perform
the selected function by itself. The reconnecting of DMX signal will
automatically break the performed function, and the module will again be
controlled by DMX signal.
13