PXM PX254, Руководство пользователя

Страница: 17 / 19

sample connection of LED stripe
17
typical LED stripe
controller DMX
1 2 3 4 5 6
PX015
1 2 3 4 5 6
Chaser Scene
Club 6p
90
% 100
80
70
60
50
40
30
20
10
0
100 %
90
80
70
60
50
40
30
20
10
0
Master
Music
Speed
GND
DMX-
DMX+
B
G
R
+12
19. CONNECTION SCHEME
PX254 uses active type DMX, therefore there is no need to use terminators at the end of the DMX
line. With this solution applied, there is no limitation of number devices that can be connected to
the DMX controller (connected in series).
Connections must be made using cables of suitable thickness.
Properly made connections reduce the risk of damaging and improve its reliability. Apply only
shielded cables to connect the DMX signal.
Note: In case of loosing power supply in any devices that work connected in series the following
devices in chain will loose connection with main controller.
B
G
R
+12
Please note that the PX254 driver is
common anode type device!!!
It is possible to connect lamps
with 4-wires cable with a only!
7-24VDC
18A max
OUTPUT:
INPUT:
3x6A
PWM
7,5A