5. U
SE OF THE DEVICE
After switching on you will notice the main window visualizing options set on the controller. The
main graph shows the frequency spectrum of the audio signal. In the buttom left corner a level-
graph of audio signal in the real time is shown.
If the device receives the DMX signal a green message
] is displayed. If no DMX
[
DMX Signal OK
signal is detected at the input to the device on the screen a message
] is
[
No DMX Signal
displayed.
Description of other messages displayed on the [
Menu
]
screen:
ź
Cfg1
,
Cfg2
,...,
Cfg16
- currently set music configuration, which controls working mode of the
PX245 when no DMX signal is received;
ź
Bypass
- message that informs about receiving by the device DMX-512 signal and transmitting
it without any changes (the message is displayed instead the Cfg1,Cfg2,...,Cfg16);
ź
1
,
2
,
3
,...,
8
- following music streams are described with numbers in different colors and
corresponding lines of proportional lengths as described below;
ź
Horizontal lines
- their location and length correspond with threshold level and range of
frequency of each music streams described with the number of the same color (graph covers
the frequency range 0 ÷ 8000 Hz);
ź
Vertical lines
- show DMX-512 signal value generated on a base of the music stream
(maximum value corresponds with 255 DMX value).
5
Содержание PX245
Страница 1: ...Manual Sound to Light Converter PX245 R...
