PXM PX235, Руководство пользователя

Страница: 5 / 14

3
6. MAIN MENU
At the top of the screen is a bar to choose between a 3 screens of the main
menu. To go to the other two please select the > button by pressing or ,
and then confirm the selection of the enter key. The first screen shown after hitting the
button is the
. Another is the . Both represent in graphic form the current
state of input and output signal from the device.
Summary
Previous Next
DMX In DMX out
5. SUMMARY SCREEN
When you turn the device appears on the screen panel, which describes the
current state of DMX signal. If the device takes the DMX signal is green displays
.
In case of no DMX signal detected at the input to the device on the screen will
be showed message .
DMX
Signal OK
No DMX Signal
Description of the other messages on the Summary screen:
!
- Current wind speed from the anemometer and its
value after conversion to the DMX protocol (value of this function can be changed in a
Menu
Wind Speed > DMX )
!
- information regarding the status of alarm output: red dot indicates the
output off and the green output on.
!
... - voltage value in the subsequent analog inputs 0-10V and the
value in DMX protocol of assigned to them DMX channels.
Speed 0.00 [m/s] -> DMX: 000
Out OFF/ON
1: 00.00[V]>000,