Pro Video instruments
VUMATRIX FX HDMI OVER IP MATRIX EXTENDER QUICK START GUIDE
6
APPENDIX A: CHANGING IP ADDRESS OF TRANSMITTER/RECEIVER
NOTE: If the default IP address is changed and then the address is lost, refer to Appendix C for direction on how
to reset the unit to factory defaults.
To change the IP address of an individual Transmitter or Receiver:
•
Look for the default IP address of the unit printed on the sticker at the bottom of the unit. This IP
address is determined by the hardware and is unique for each device.
•
Connect the device to your computer via Ethernet. (If your computer is set to obtain an IP address
automatically, th
ere’s no need to set a manual IP address.)
•
Open a web browser window (i.e. Internet Explorer or Chrome). In the browser’s address bar, enter the
unit’s default IP address to navigate to the unit’s web interface.
1)
Click on the Network tab.
2)
Under IP mode,
click “Static”.
3)
Enter the IP Address, Subnet Mask, and Default Gateway as needed.
4)
Click “Apply” to save changes.
5)
You will be prompted to Restart the device. Go to System > Functions > Reboot to restart in the menu,
or simply power off then power on the device.
