30
2.
Scroll down to the serial over IP settings. Make sure the enable serial over IP checkbox is
enabled. Set the operation Mode to Type 2. Leave the default settings for the baudrate
settings. (Only change these settings if you have experience in networking or knowledge in
serial data transmission). Click Apply to save changes.
4.
Select the system tab on the top of the window. Click on the Utilities button. Then click the
reboot button.
DO NOT select the factory default button
. The unit will reboot and the
transmitter setup is complete.
A
d
va
n
ced
Se
tt
in
gs
Содержание VuMATRIX 4K IPRX LE
Страница 39: ...39 Warranty Warranty ...