PVI VuMATRIX 4K IPRX LE, Руководство по эксплуатации

Страница: 22 / 43

22
6.
Select static IP. Using the Receiver Network Map, Type in the IP address for the first receiver.
Then select Apply.
Enter in the IP address here
7.
Then take a label or sticker and write the IP address of the receiver and place it on the
transmitter where it is clearly visible.
NOTE: DO NOT copy the IP address on the picture below. It is only for visual reference.
8.
Programming is complete for your receiver.
9.
If you have more than one receiver to program, go to the next receiver and connect it to your
computer as in step 1.
10.
Then Repeat steps 2 through 8 for all your receivers.
NOTE
: Don’t forget to use the Receiver Network Map when programming all your receivers.
Using the network map will ensure that all receivers will have different IP addresses so that
there will be no communication issues or conflicts.
Co
n
fig
u
rin
g th
e
VuMA
TR
IX
R
e
ceive
rs