CONQUEST
®
WATER HEATER
9
PV500-71 02/16
3.5 Clearances To Combustible Surfaces
The minimum clearance to combustible material is 15" from the top, 24" from the front and zero clearance (0") from
the sides and back of the water heater. The Conquest can be installed directly on a combustible floor.
Distance minimale aux matériaux combustibles est égale à zéro (0 cm) sur les côtés et à l'arrière, avant les 61 cm,
38 cm de haut et peut être installé directily sur un plancher combustible.
3.6 Service
Clearances
Additional clearance beyond the minimum required to combustible material should be considered to facilitate easy
access for inspection and service of items such as the burner, gas controls and plumbing connections. Also allow
sufficient space for installing and servicing building water, gas, vent, combustion air, electrical, pump and other
auxiliary/optional equipment and connections.
3.7 Other Code and Regulatory Clearances and Requirements
Additional clearance beyond the minimum required to combustible materials and other requirements may be required
to comply with local, state or national codes and regulations. It is to the responsibility of the installer to comply with
these requirements. Examples of codes or regulations that may apply are the National Electric Code,
State/Regional/National drain water and flue emissions regulations, the National Fuel Gas Code, Building
Construction and Safety Codes, the Americans with Disabilities Act (ADA) and, in states where a water heater above
a certain input or storage capacity is considered a boiler, the applicable boiler code requirements, the applicable
boiler installation requirements in “Safety Code for Controls and Safety Devices for Automatically Fired Boilers”
(CSD-1) and other regulatory requirements.
