Spectra UV
Revision D
/
January 2022
Page 29 of 47
Setup Mode
269B
In Setup mode, the operator can set the parameters for module functions including the
parameters for Auto Cycle. The Recipe name is shown at the top of the screen. You will edit
the Recipe that is shown when you make changes in Setup mode.
1.
112B
Select the
Setup
icon or the “
ESC
” button from Cycle Stop.
2.
113B
Use the
+ - Page
icons or the F2 and F4 keys to scroll through the Recipes. The
Recipe that will run in Auto Cycle is the one shown on the screen.
431B
Note: The options shown may be different depending on module configuration.
Lamps
270B
Use the arrows on the screen or the “
F1
” and “
ESC
” button to scroll to the Setup-Lamps
screen.
1.
114B
Select the lamp to toggle the lamp function on and off. If a lamp selection is “
ON
”, it
will turn on in auto mode. If the lamp selection is “
OFF
”, it will not turn on in auto
mode.
23B
Figure 23: Setup Lamps
2.
115B
The time displayed next to each bulb indicates how long the lamp has been on.
When you replace a bulb, select and hold the clock icon for five second to reset the
timer to zero (0).
3.
116B
Use the
+ -
Page icons or the F2 and F4 keys to scroll through the Recipes. The
Recipe name is shown at the top of the screen.
432B
Note: The lights will not operate if the exhaust blowers are off.
