MR2 Manual
Revision B
/
June 2021
Page 10
of
34
6.
Remove any lubrication fluid in the fluid distribution block.
7.
Examine the oil window gasket for any signs of wear or damage. Replace the gasket
if there are signs of wear.
8.
Use a 3 mm hex key to remove the six M4x16 bolts on the front of the air body.
Figure 5: Remove the Air Body Bolts
9.
Remove the air body.
10.
If necessary, remove the valve stop.
Figure 6: Remove the Valve Stop
11.
Remove the inlet and outlet pistons from the air body.
Figure 7: Remove and Clean the Pistons
12.
Clean the air body and the pistons.
13.
Examine the piston O-rings for wear. If they are worn, replace them.
