12 Operation of the Software PVPM.disp
-24-
12
Operation of the Software PVPM.disp
For the installation of the software please refer to chapter10. After starting the software the following window
appears:
The displayed document is empty, all values are zero. Now you can open an exisiting data file, make a
measurement or retrieve already measured data from the PVPM. The new or received data will be stored to this
document and you are able to continue evaluating these data or save it to a hard disk file. For the evaluation
you can refer to the line diagram of measured data and the displayed results. The function “Export” lets you
export the data to different file formats for further evaluation in other software.
Buttons are grayed out, when they are not active. They change to normal state, when this function is
meaningful.
12.1
Main Menu File
12.1.1
Open
I-V-curves saved to disk before can be
reloaded using the „Open“ button. The loaded
data will overwrite the data in memory. If you
want to re-use the current data later you will
have to save it to a disk file before loading
different data. The files have the default
extension .SUI.
If you click on the directory symbol near the
displayed directory in the above dialogue
window, you can select the directory, whose
measuring data are to be displayed in the list.
In this list you can now either select an entry by
doubleclick (these data will automatically be
loaded and represented in the working window) or you can select some or all entries in the list, which than may
be deleted, exported or printed (→ test reports).
Operation manual for PVPM devices
PV-Engineering GmbH
