Nixie Tube Clock ‘Quattro'
ISSUE 3 (01 November 2018)
www.pvelectronics.co.uk
- 12 -
Setting the Time and Date:
From time display mode, press and hold ‘SET’ button for 2 seconds until
the seconds digits are displayed
Press the ‘ADJ’ button to reset seconds to zero.
Briefly Press ‘SET’ again and the minutes will be highlighted
Press the ‘ADJ’ button to set the minutes.
Briefly Press ‘SET’ again and the hours will be highlighted.
Press the ‘ADJ’ button to set the hours.
Finally, briefly Press ‘SET’ again to revert to normal clock operation.
Auto Date Display:
Setting parameter (14) to ‘1’ will enable auto display of date between 55
and 59 seconds past each minute.
Night Blanking Override:
During programmed night blanking, the blanking may be overridden to
see the time by briefly pressing the ‘SET’ button. Tubes will remain lit for
the period defined in parameter (15).
