Puxing PX780 Скачать руководство пользователя страница 5

OWNER’S MANUAL

 

用户手册

         

DMR Digital Radio

 

 

In order to maximize the performance of the product and to ensure compliance with the radiation limits in the relevant occupational or 

controlled environment of the above criteria, the sending time shall not exceed 50% of the rated factor and shall follow the instructions 

below: 

·

  RF radiation is generated only during transmission (speech) rather than reception (listening) and standby. 

·

  The distance between the terminal and the body during transmission should be at least 2.5 cm. 

三.用前准备

  Preparation before use 

■充电

  Charging 

Be sure to ensure that the product is off when charging. Battery into the charger may be charging red flashing constantly flashing, 

this is the battery power is too low, the charger to protect the battery pre-charge process, is a normal phenomenon, Generally continue for 

30 seconds to turn the red light of the normal state of charge. 

Please use the charging seat specified by our company to charge the battery, the charging seat indicator shows the charging status. 

1. Plug the power adapter into a power outlet; 

2. Plug the other end of the power adapter into the socket on the back of the charging cradle; 

3. Insert the battery or the battery-equipped product into the charging cradle correctly; the indicator light on the charging cradle shows 

the charging status. When the indicator light is red, it indicates the start of charging. When the indicator turns green, the charging is 

completed. The specific table below. 

Indicator display 

Current charge status 

Red light 

In charging 

Green light 

The charging is completed 

Note:   

  For best battery performance, charge for a minimum of 4 hours on first charge. 

 

■电池信息

  Battery information 

 

The first use of the battery 

Since the battery is not fully charged at the factory, please charge the new battery before use. Under normal circumstances, the 

battery when used for the first time, need to charge 4 hours, lithium-ion battery charging using slow charge or fast charge can be 

performed when charging. It is recommended that the new battery be operated as above for the first three uses. When you find the battery 

power is low, you need to charge the battery. 

 

Suitable battery type 

Please use the specified battery for charging; use of other batteries may cause explosion, resulting in human injury. 

 

电池的安全注意

  Battery safety attention 

1. 

Do not allow metal contacts (including coins, keys, jewelry, or other conductive metal) to be touched by the battery contacts or 

pole pieces. Otherwise, the battery may short circuit, discharge, heat or leak, which may result in damage to the item or personal 

injury. Therefore, be careful when handling any battery. 

Содержание PX780






















Отзывы: