Puxing PX780, Руководство пользователя, Страница: 13 / 21

OWNER’S MANUAL
用户手册
DMR Digital Radio
13
接收紧急呼叫
1. The walkie-talkie receive the emergency alert, the LED indicator light for green
，
The walkie-talkie enter the receiving state, and receiving
the other party's speech until the end of the emergency microphone duration.
2. The LED indicator light off
，
Hold the walkie-talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the
mouth.
3. Press
【
PTT
】
key to reply the call, The LED indicator light is red.
The remove the current emergency mode by switching channels or turn off the walkie-talkie
。
重新开始紧急模式 Restart emergency mode
It can happened in two situations:
•
When the transceiver is in emergency mode and changes channel, it will exit emergency mode. If an emergency alert is activated
on the new channel, the transceiver resumes the emergency call.
•
Press the preprogrammed alarm on key in the emergency call start / transmit state. This way the walkie-talkie will exit the status
and restart the emergency call.
退出紧急模式 Exit emergency mode
The transceiver exits emergency mode when one of the following happened:
•
Receive emergency alert confirmation (emergency alerts only), or
•
The number of major attempts to send an alert has been reached, or
•
Press Preprogrammed Alarm Off, or
•
Press the [PTT] key.
If the radio is turn off, it will exist the emergency mode. When you turn on again, the radio won
’
t start resume emergency mode
单独工作 Individual Operation
This feature is ideal for people who work alone. If you encounter unexpected situations during individual operation, you can’t operate the
radio in preset time. The radio will automatically send alarm to your partner or control center for help.
1.
开启单独工作
Turn on individual operation
⚫
Through writing frequency software, this function is turned on when the radio is started.
⚫
Press the preset [Individual Operation] shortcut to enable this function.
2. If you do not operate the radio in the preset response time, the radio will prompt before the response time is up (depending on the
dealer settings). At this point, you can end the prompt with a valid physical operation (knob or button operation). When the response time
is up, the radio will automatically turn on the alarm system of the current channel.
3.
关闭单独工作
Turn off individual operation
⚫
Turn this function off by writing-frequency software.
⚫
Press the preset [Individual Operation] shortcut again to turn off this function.
Note: If you do not turn off the individual operation function before shutting down, the function is still active the next time you turn on
the radio.