Puxing PX-558 Скачать руководство пользователя

Страница: 9 / 13

. OPERATIONS AND SETTINGS

OPERATIONS AND SETTINGS

side key 2 and side key 3 can be programmable.

1) NONE

◆

No function to be set

2) MONITOR

◆

If press the monitor key, it can detect if the channel is busy, it can ignore all the interference codes

temporarily and receive weak signal.

3) SCAN ON/OFF

◆

Scan ON: The radio will scan from the current channel.

◆

Scan OFF: To press the side key again.You can exit.

◆

Press the key to switch High/Low Power Switch.

4) HIGH/ LOW POWER

5) TALK AROUND

◆

Talk around allows you to communicate directly with other radios without the repeater. When using talk around,

the transmitting frequency is same with receive frequency.

Press talk around key (programmed key) to enter this function and press it again to exit.

6) REVERSE

◆

Transmitting frequency can reverse with receiving frequency.Codes will reverse too.

Press frequency reverse key (programmed key) to enter this function and press it again to exit.

. OPERATIONS AND SETTINGS

7) PRIORITY SCAN

◆

Set priority channel: open the programming software, and select the priority channel (1-16 optio- nal).

Suppose channel 6 was selected.

◆

Programming side key: program one of the side key to be priority channel function.

Press the programmed side key to enter the priority scan mode, the radio will scan like this: 6-1,6-2, 6-3....

◆

Turn off PRI: press PRI on/off key to exit

8) VOX ON/OFF

Radio will transmit when detects voice, without press PTT key.
Use VOX earpiece or radio micphone to talk hands-free, operation as follows:

◆

Programming the VOX ON/OFF key.

◆

Press the side key to open this function.

◆

To communicate by earphone you should plug the earphone before turning on the radio.

◆

Speak to VOX earpiece or radio micphone to send the voice.

◆

Press this side key again to exit

Содержание PX-558














Результаты поиска

Содержание PX-558

Отзывы:

Похожие инструкции для PX-558

Бренды по названию

Популярные бренды

Puxing PX-558, Руководство пользователя

Результаты поиска

Содержание PX-558

Отзывы:

Похожие инструкции для PX-558

Бренды по названию

Популярные бренды