30
© 2008 Directed Electronics. All rights reserved.
Ch
Function
3
Reset Features: This resets features all of the security system to the factory
default settings.
Note:
This feature does not delete the remotes from the security system or reset
the Virtual Tach setting.
4
Virtual Tach Reset: Deletes all previously learned values for Virtual Tach, and on
the next remote start sequence the unit begins virtual tach initialization.
Note:
The “Zap” feature on the Bitwriter does not reset the Virtual tach
setting.
3.
Transmit.
While
HOLDING
the
Program
switch
, press the button on the transmitter that you
would like to control the selected receiver chan-
nel.
4.
Release.
Once the code is learned, the Program
switch can be released.
You can advance from programming one channel to another by releas-
ing the Program switch and tapping it to advance steps and then hold-
ing it. For instance: You have programmed Channel One and you want
to program Channel Two. Release the Program switch. Press it one time
and release it to advance from Channel One to Channel Two. Now,
press and
HOLD
the Program switch. The LED will flash two times. As
before, do not release it.
If you want to program Channel Three after programming Channel
One, release the Program switch, press it twice and release it to ad-
vance to Channel Three. Then press it once more and
HOLD
it. The
LED will flash three times to confirm it is ready to receive the code from
the transmitter.
