manualshive.com logo in svg

PURSUIT Denali 28, Руководство пользователя

Поделиться
Скачать
PURSUIT Denali 28 Скачать руководство пользователя страница 19

DENALI 28

Chapter 1:

PROPULSION SYSTEM

1.1 General

The Denali 28 is designed to be powered with a single or twin inboard/outboard engine(s) and drive
system(s).  Each manufacturer of the various inboard/outboard drive systems provides an owner’s
information manual with its product.  It is important that you read the manual(s) very carefully and
become familiar with the proper care and operation of the engine and drive system.  A warranty
registration card has been furnished with each new engine and can be located in the engine owner’s
manual.  All information requested on this card should be filled out completely by the dealer and
purchaser and then returned to the respective engine manufacturer as soon as possible.

DO NOT ATTEMPT TO SERVICE ANY ENGINE OR DRIVE COMPONENT WITHOUT BEING
TOTALLY FAMILIAR WITH THE SAFE AND PROPER SERVICE PROCEDURES.  CERTAIN
MOVING PARTS ARE EXPOSED AND CAN BE DANGEROUS TO SOMEONE UNFAMILIAR
WITH THE OPERATION AND FUNCTION OF THE EQUIPMENT.

DO NOT INHALE EXHAUST FUMES!  EXHAUST CONTAINS CARBON MONOXIDE THAT IS
COLORLESS AND ODORLESS.  CARBON MONOXIDE IS A DANGEROUS  GAS THAT IS PO-
TENTIALLY LETHAL.

1-1

Содержание Denali 28





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды