manualshive.com logo in svg

PURSUIT Denali 28, Руководство пользователя

Поделиться
Скачать
PURSUIT Denali 28 Скачать руководство пользователя страница 112

DENALI 28

Lifting

It is essential that care be used when lifting your boat.  Make sure the spreader bar at each sling is
at least as long as the distance across the widest point of the boat that the sling will surround.  Put
the slings in position.  The positions are marked with small labels on each side of the boat under
the rubrails.

BOATS HAVE BEEN DAMAGED FROM IMPROPER LIFTING AND ROUGH HANDLING
WHEN BEING TRANSPORTED BY LIFT TRUCKS.  CARE AND PROPER HANDLING PRO-
CEDURES MUST BE USED WHEN USING A LIFT TRUCK TO MOVE THE BOAT.  NEVER
ATTEMPT TO LIFT THE BOAT WITH A SUBSTANTIAL AMOUNT OF WATER IN THE
BILGE.

SEVERE GELCOAT CRAZING OR MORE SERIOUS HULL DAMAGE CAN OCCUR DURING
HAULING AND LAUNCHING IF PRESSURE IS CREATED ON THE GUNWALES (SHEER) BY
THE SLINGS.  SPREADERS ARE NOT REQUIRED IF BELTS ARE NOT CREATING PRES-
SURE (CABLE DRUMS FURTHER APART THAN BEAM OF BOAT).  FLAT, WIDE BELTING
SLINGS AND SPREADERS LONG ENOUGH TO KEEP PRESSURE FROM THE GUNWALES
ARE ESSENTIAL.  DO NOT ALLOW ANYONE TO HAUL YOUR BOAT WHEN THE SPREAD-
ERS ON THE LIFT ARE NOT WIDE ENOUGH TO TAKE THE PRESSURE OFF THE GUN-
WALES.

14-2

Sling Locations

Содержание Denali 28





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды