PurSteam PS-937, Руководство пользователя, Страница: 9 / 16

Water Tank
The steamer is designed to be used with tap
water. However, if the water in your area is hard,
PurSteam recommends that you mix half tap
water and half distilled water, which reduces the
hardness; you may also use bottled water or
distilled water only.
Ensure that the device is unplugged. Remove
the water tank from the base of the appliance
by pulling it upwards. Unscrew the Valve Cap
and fill the tank with water.
Close the Valve Cap and put the water tank
back into place.
IMPORTANT: Never use water that contains
additives (starch, perfume, aromatic substanc-
es, softener, etc) in the steamer. Additives
such as these can affect the properties of the
steam and lead to the formation of deposits.
USE
Only operate the steamer on the floor, clear of
any materials which may obstruct the base of
the steamer (flat and horizontal surface).
IMPORTANT: Do not operate the unit with an
empty Water Tank.
1. Plug in the power cord and turn on the power
using the foot-operated pedal. The power light
will illuminate. After approximately 60 seconds
of heating time, the unit will begin producing a
flow of steam from the Steam Nozzle.
8
Valve Cap