Pursit 2260 DENALI, Руководство пользователя

Страница: 77 / 130

2260 DENALI
RUNNING AGROUND OR STRIKING AN UNDERWATER OBSTRUCTION CAN RESULT IN SE-
RIOUS INJURY TO PASSENGERS AND DAMAGE TO THE MOTOR OR BOAT. IF YOUR
BOAT SHOULD BECOME GROUNDED, DISTRIBUTE PERSONAL FLOTATION DEVICES AND
INSPECT THE BOAT FOR POSSIBLE DAMAGE. THOROUGHLY INSPECT THE BILGE
AREA FOR SIGNS OF LEAKAGE. AN EXPERIENCED SERVICE FACILITY SHOULD CHECK
YOUR UNDERWATER GEAR AT THE FIRST OPPORTUNITY. DO NOT CONTINUE TO USE
YOUR BOAT IF THE CONDITION OF THE UNDERWATER EQUIPMENT IS QUESTIONABLE.
10.8 Trailering Your Boat
If you trailer your boat, make sure that your tow vehicle is capable of towing the weight of the trailer,
boat and equipment and the weight of the passengers and equipment inside the vehicle. This may
require that the tow vehicle be specially equipped with a larger engine, transmission, brakes and
trailer tow package.
The boat trailer is an important part of your boating package. The trailer should be matched to your
boat's weight and hull. Using a trailer with a capacity too low will be unsafe on the road and cause
abnormal wear. A trailer with a capacity too high, can damage the boat. Contact your dealer to
evaluate your towing vehicle and hitch, and to make sure you have the correct trailer for your boat.
Important Note:
Your 2260 Denali is a heavy boat and care must be taken when selecting the trailer. We
recommend that you use a bunk style trailer that incorporates a combination of heavy duty
rollers, to support the keel and long bunks running under and parallel to the stringers to
support the hull. Avoid using a full roller trailer that does not have bunks. Roller trailers
have a tendency to put extreme pressure points on the hull, especially on the lifting strakes,
and have damaged boats. The situation is worse during launching and haul out. Damage
resulting from improper trailer support or the use a full roller trailer will not be covered by
the Denali Warranty.
Note: Contact your dealer to evaluate your towing vehicle and hitch, and to make sure you
have the correct trailer for your boat.
Choosing and Setting-up a Trailer
• Make sure the trailer is a match for your boat’s weight and hull design. More damage can be
done to a boat by the stresses of road travel than by normal water operation. A boat hull is
designed to be supported evenly by water. So, when it is transported on a trailer it should be
supported structurally as evenly across the hull as possible allowing for even distribution of the
weight of the hull, engine and equipment.
10-9