Charging voltage LED: to check the charging voltage press the status
selection button until the charging voltage LED light is on. The charging
voltage will be displayed on the LCD screen.
Charging current LED: to check the charging current press the status
selection button until the charging current LED light is on. The charging
current will be displayed on the LCD screen..
Charging stage LED: to check which charging stage is active, press the
status button until the charging stage LED light is on. The LCD screen will
then display which of the 7 charging stages is active.
Status selection button: press and hold the status selection button to
change the LCD screen display between the charging voltage, charging
current or different charging stages display.
Switching power supply LED: If you want to use this charger as a switching
power supply unit, press the mode selection until the lithium battery
mode LED light is on. There are two colours in this switching power supply
mode: red-13.4V, orange-13.8V.
Lithium battery mode: press the MODE SELECTION until the Lithium bat-
tery mode light shows GREEN.
GEL/AGM/WET batteries mode: press the mode selection button to set the
battery type.
Mode selection button: press and hold the Mode button to switching
between power supply functions or for setting LITHIUM/GEL/AGM/WET
batteries type.
LCD screen display: automatically circularly displayed will be the charging
voltage, current and different charging stage. When overheat or short
circuit protection is activated the LCD displays "-P ". When there is no oper-
ation for a period of 60 seconds, the screen will go out automatically and
will come on again if a button is pressed.
The LCD screen display and button function
03
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
