background image

P

RODUCT DESCRIPTION

1

The IMP003 Imperium 5A DC-DC charger converts

direct current into the correct charging voltage for

the onboard battery.

The Imperium 5A DC-DC charger will limit the

charging current to a maximum of 3.1A to avoid

overloading the cabling and it also ensures that no

current can flow from the on-board battery back to

the starter battery, as with all LiFePO4 batteries it is

better not to have a direct connection to any other

type of battery. Because the offered charging

voltage is often too low to fully charge LiFePO4

(14.6V) batteries, the DC-DC 5A charger transforms

this charging voltage to the correct voltage.

When the charger is setup for lead-acid batteries it

operates a 4 step, 3 stage voltage.

When the charger is setup for lead-acid batteries it

operates a 4 step, 3 stage charging profile. When

the charger is setup for lithium batteries it operates

a CC/CV charging strategy

01

Rechargeable battery   

Source, starter battery or alternator

S

AFETY IN

S

TRUCTIONS

2

2.1 Saf

e

ty ins

tructions 

sta

teme

nt

These safety instructions are divided into 3 categories,

as follows:

Danger, these instructions must be

followed to prevent injury or harm.

W

ARNING!

These instructions must be followed

to prevent damage.

C

AREFUL!

Important advice and guidance.

PA

A

TTENTION!

2.2 Saf

ety regul

a

tions

Read this manual carefully before using the

Imperium DC-DC 5Ah Charger;
Keep this manual near the Imperium DC-DC 5Ah

Charger and ma

k

e it available to the user of the

Imperium DC-DC 5Ah Charger; 

As soon as the voltage of the source battery is

available the green Power LED of the charger will

turn on. During the charging process the red Charge

LED will be on. When the battery is fully charged the

Charge LED will turn off.

When the incoming voltage will go under 11.2 V or

12.0 V, the charging process stops to prevent the

source battery being discharged too deep

(depending on the settings).   

Only tec

hnically qualified pe

rsonnel should install

the Imperium DC-DC 5Ah Charger;

Use cables with the correct cross-section and

k

eep the cable connections as short as possible. 

Use th

e supplied flat plugs a

nd chec

k w

hether

they clamp properly; 
Do not place the Imperium DC-DC 5Ah Charger

in a high temperature  environment or in direct

sun or with a heat source > 45 ° C; 
Avoid damage to the Imperium DC-DC 5Ah

Charger housing;
Do not use a damaged Imperium DC-DC

5Ah Charger.

DESCRIPTION EN OPER

A

TION

3

3

.

1 Ope

ra

tion

Advic

e: fit 5A fuses. T

hese also function as reverse

polarity protection.

When mounting the Imperium DC-DC 5Ah
Charger, choose a place that is dry and 

clean;

 

The Imperium DC-DC 5Ah Charger can be

mounted in any position;
Use at least 1,5 mm² cables for connection and

to ma

k

e the cables as short as possible to

prevent loss of current. 

Connection diagram:

Отзывы: