Page 8
ELECTRICAL WIRING DIAGRAM:
View
when
installed
behind
wheels
SeaGo™ is supplied with a Battery Wiring Loom designed to connect to the Electronic Control Module and
battery. Additionally, it has a two wiring looms that connect to the Electronic Control Module which include
an Anderson Plug at the other end to connect to the Anderson Socket on the Power Movers.
1. Take one of the wiring looms with the Anderson Plug and plug the terminal at the other end into
terminals 1 & 2 on the Control Unit.
2. Plug the Anderson Plug into the Anderson Socket as per the diagram.
3. Repeat for the other wiring loom.
4. Take the Battery Wiring Loom and connect the red lead to positive terminal on the Control Unit and
connect the black lead to negative terminal on the Control Unit.
5. Take the Battery Wiring Loom and connect the Battery Clip to the battery matching the positive clip
to the positive terminal on the battery and the negative Battery Clip to the negative terminal on the
battery.
6. Engage the Power Movers and SeaGo™ is now powered and ready to operate.
Anderson Plugs
Leads
3 & 4
Leads
1 & 2
Power Movers
Ensure to connect all terminals correctly, as cross polarsing them will
short the Electronic Control Unit and void the warranty
SGO130-1304 SeaGo User Manual vs2.indd 8
3/05/2013 3:48:10 PM
