Puricom Europe ZIP, Руководство пользователя

Страница: 13 / 17

ZIP/ User manual / 8.How to change filters?
/ 25 24 /
8.How to change filters? / User manual / ZIP
Register Your Zip at www.zipwater.co.uk Register Your Zip at www.zipwater.co.uk
7. Remove the back cover.
8. Pull the postfilter out to free it from the retaining clips.
9. Disconnect the tubes from the elbow connectors on both ends
of the postfilter. To do this, (1) remove the safety clip from under
the collet sleeves on the elbow connector. (2) Push the collet
sleeves in towards the elbow connector. (3) While holding the
collet sleeves in, pull the tube out of the elbow.
10. Unscrew the elbow connectors from the ends of the postfilter.
11. Remove a new post filter from its wrapping and screw the
elbow connectors into the ends of the new postfilter using PTFE
tape to avoid leaks.
12. Insert the tubes into the top and bottom elbow connectors
paying attention to the direction of flow indicated by the arrow
on the outside of the post filter, (top to bottom). Be sure to push
the tubes all the way in to the elbow untill they set at the back
of the elbow. Slide the collet sleeve out and replace the safety
clip under the collet sleeve.
13. Mount the postfilter back into the retaining clips and replace a
back cover.
To change the membrane, proceed as follows.
1. Remove the back cover.
2. Remove the postfilter from the postfilter retaining clips and
remove the retaining clips from the RO cartridge.
3. Pull the RO membrane cartridge to remove it from the RO
cartridge retaining clips.
4. To remove the elbows from the RO cartridge, push the collet
sleeves into the elbow connector.
5. While holding the collet sleeves in, pull the elbow off the top of
the RO cartridge.
6. In the same way, remove the two elbows from the bottom of the
RO cartridge.
7. Remove the new RO cartridge from its packaging and remove
the protection caps from the top and bottom of the cartridge.