EN
24
Operating Manual: PX-iP - Gateway
4.13 Switching off the gateway
To switch off the gateway without re-
setting the gateway or the radio settings,
proceed as follows:
(1)
Remove power cable on gateway
Cyclic acoustic signal on the
gateway for 30 seconds
(2)
Wait 30 seconds
or
(3)
Briefly press gateway button (B)
5
Gateway is switched off
5
With a delay of 10 minutes you will
get the message "Connection to
PX-iP lost"
When you reconnect the power
cable, the gateway is placed in
service again. You will receive an
email stating "Gateway is again
reachable".
5 Reset
In some situations you must execute a
reset to restore the default state, e.g., for
new installation of the radio group after
a move.
5.1 Gateway reset
Prior to the reset, the gateway must be
connected to the power supply.
(1)
Start reset
f
Remove power cable on the
gateway
Cyclic acoustic signal on the
gateway for 30 seconds
(B)
During this time, the following steps
must be performed in that sequence:
(2)
Reset radio module
f
Press radio button (A) on the gate-
way until it flashes, then release
Содержание PX-iP
Страница 1: ...PX iP Gateway Operating Manual ...
