User Manual
PT-PSW-92
5
OUTPUTS:
A.
HDMI: HDMI video output port.
B.
HDBT/PoH: Support PoH. Connect with an HDBaseT Receiver to transmit AV
signal or IR/RS232 control signal.
C.
AUDIO: Audio output port, the audio comes from the input audio corresponding
to the selected video source and is mixed with MIC audio.
D.
RS232: The RS232 port and that one on HDBaseT Receiver can transmit RS232
commands each other by pass-through function.
CONTROL:
a.
FIRMWARE: Type-A USB port for updating system firmware or loading
customized EDID data.
b.
IR EYE: Connect with IR Receiver (with carrier wave only) to receive IR signal
send by IR Remote to control this Scaler Switcher.
c.
IR ALL IN: IR input port used with far-end IR output port. Connect with IR
Receiver (with carrier) to receive IR signal from all kinds of IR Remote to control
far-end devices from local.
d.
IR ALL OUT: IR output port used with far-end IR input port. Connect with IR
emitter (with carrier) to send IR signal to control local devices from remote.
e.
RS232: Serial port, 3-pin phoenix connector, connect with a control device (such
as PC) to control PT-PSW-92.
f.
TCP/IP: Ethernet port, connect PC to control PT-PSW-92 via GUI.
I: AUDIO AMP: Audio output port, connect with 70V/100V constant voltage audio
amplifier.
II: AC100V-240V: Power port, connect to an AC 100V~240V power via the included
power cord.
