PureTools PT-HDBT-210, Руководство пользователя

Страница: 8 / 20

User Manual
PT-HDBT-210
7
5. HDMI Out: Type-A female HDMI output port to connect HDMI display (e.g. TV).
6. Audio Breakout: If ARC mode is turned off, the Toslink connector is connected
to the speaker or amplifier for HDMI source audio de-embedding. Note, that if
ARC mode is enabled, this port does not output audio.
7. IR In: 3.5mm jack to connect the IR receiver for IR pass-through.
8. IR Out: 3.5mm jack to connect the IR emitter for IR pass-through.
9. RS232: 3-pin terminal block to connect the RS232 control device (e.g. PC) or a
third-party device to be controlled.
10. HDBT In: RJ45 port to connect to the HDBaseT output port of the transmitter
using a CATx Ethernet cable. The Link LED illuminates orange when there is a
valid HDBaseT link between the transmitter and the receiver. The HDCP LED
illuminates green when the video contains HDCP content.
11. DC 24V: DC connector for the power adapter connection.
DIP Switch Operation
EDID Management
The Extended Display Identification Data (EDID) is used by the source device to
match its video resolution with the connected display. By default, the source device
obtains its EDID from the first connected display. Meanwhile, since the displays
with different capabilities are connected to the extender, the DIP switch on the
front panel of transmitter can be used to set the EDID to a fixed value to ensure the
compatibility in video resolution and aspect-ratio.