PureTools PT-HDBT-210, Руководство пользователя

Страница: 11 / 20

User Manual
PT-HDBT-210
10
HDCP Mode
Switch the DIP 4 into “ON” position to select HDCP Active mode or into “OFF”
position for HDCP Passive mode.
Switch Status Mode HDCP
OFF (0)
Passive
(Default)
Automatically follows the HDCP version of source
device.
ON (1) Active

If the input video has HDCP content, the HDCP
version of HDMI output is HDCP 1.4 for a greater
display compatibility.

If the input video has no HDCP content, the HDMI
output has no HDCP too.
ARC Mode
The front panel of receiver provides a buttons to enable or disable ARC mode, as
shown below:
Press the button with paper clip or other sharp tool to enable the ARC mode, and
then the left LED illuminates blue. Press it again to exit the ARC mode and the LED is
off.
ARC Mode Display (e.g.TV) Audio Transmission Path
ON
ARC is supported.
The TV audio is transmitted from the TV
back to the receiver directly using a
standard HDMI cable, and then it will be
output by the
ARC Audio Out port of
transmitter.
ARC is not supported. Connect the TV to the
ARC Audio In port of
receiver with an audio cable. The TV audio is