WWW.PUREMATE.CO.UK
English 7
Checking & Maintaining the Filter:
Maintain the filter by checking it frequently. Depending on air quality conditions and usage, you may
need to replace it more frequently.
Vacuum the carbon filter layer as needed to remove loose debris and dust to help prolong the life of
your HEPA filter (refer to “Air Cleaning Layers” on page 5).
To check the status of the HEPA filter, peel back the carbon layer to expose the pleated HEPA Filter.
If the HEPA Filter is no longer white and is covered in grey dust/ dirt it should be replaced.
NOTE:The appliance must be disconnected from the supply before changing the UV-C light
bulb (UV-C emitter).
WARNING!:UV radiation is dangerous for the eyes and skin. Do not operate the UV-C emitter
(UV-C light bulb) outside the appliance. Please read the Instructions carefully.
PLEASE NOTE:
Ensure carbon filter faces out when installing the filter system into the unit.
6. To reset the filter indicator , press and hold the HEPA RESET button for 5 seconds.
IMPORTANT:
Do not try to wash and re-use the Combination Filter.
Installing & Removing the UV-C Bulb:
UV Bulb Replacement Indicator
- the UV light on the display will flash when it is time to replace
the UV bulb
1. Turn off and unplug the unit
2. Press the lock and
release button and
remove the rear cove
from the unit
3. Remove the used
Combination Filter
and dispose of it in
the garbage.
4. Separate and clean both
filter layers with the brush
attachment of your vacuum
cleaner to remove lint and dust.
IMPORTANT:
Do NOT try to
wash and re-use the
Combination Filter.
5. Insert Replacement Filter into
the unit. Consult the arrow on
the filter for correct installation
director.
