WWW.PUREMATE.CO.UK
English 5
OPERATING INSTRUCTIONS
1. Plug the power cord into a 220-240V ac outlet
2. Turn unit power ‘ON’.
3. Select fan speed MODE 1-3 :
I = Lowest Speed setting
II = Medium Speed setting
III = Highest Speed setting
AUTO MODE: The last fan speed is AUTO. When AUTO is selected, the air purifier will change
the fan speeds depending on the air quality level.
4. Select UV-C ‘ON’ or ‘OFF’ using UV-C ModeButton.
5. TIMER: If you prefer to run the purifier for a specific number of hours, you can select
between 1-8 hours on the display.
Air quality monitor: detects the amount of particulate matter (PM) in the air. The
circular light on the front panel of the purifier is the air quality indicator. It will
change colours, indicating the air quality level in the room. The particulate matter
value will be displayed on the circle – see chart next page for reference.
Auto Mode:
when “Auto” mode is selected, the Air Purifier will automatically
adjust the speed level of the purifier to optimize the room air quality.
POWER ‘ON/OFF’ BUTTON
FAN SPEED MODE
AUTO MODE
UV-C 'ON/OFF' MODE / RESET BUTTON
TIMER
6.Negative Ionizer ‘ON/OFF’ MODE / HEPA RESET BUTTON
HEPA
RESET
ION
