CLEANING AND MAINTENANCE
STORAGE
Attention! Always switch off and unplug the unit before cleaning.
.
You can ensure many years of trouble free operation of your PM 805 humidifier by following a few simple maintenance procedures.
If your water is hard, containing high concentrations of calcium and other minerals, then over a period of time white dust will start
to deposit on the various surfaces in the room. A white, film - like substance will also start to develop in the water basin, on the
transducer and on the inner surface of the water tank. This white film will impede the proper function of the transducer and the
operation of the machine.
We recommend the following :
1. If your water is very hard, we recommend that you boil it first, allow it to cool completely before use in the humidifier. The boiling
will reduce the mineral concentration in the water. The other option is to use distilled water if your mineral level is still too high
2. If you are using the machine on a daily basis, clean the transducer, water tank and basin once a week.
3. When the water tank needs a refill, empty the remaining water from the tank and fill it with fresh water.
4. Clean the whole machine and make sure to keep all the parts completely dry when the machine is not in use.
How to clean the transducer:
1. Place 5 -10 drops of vinegar on the surface of the transducer and wait for 2-5 minutes.
2. Using a small brush, cotton swab or toothbrush, gently clean the mineral film from the surface of the transducer.
3. Rinse the transducer with clean water.
4. Never use sharp or solid objects for cleaning the transducer
How to clean the water basin:
1. Clean the water with a soft damp cloth. If there is excess film on the surfaces, then soak the cloth with vinegar and repeat the
process.
2. If there is a film in any of the depressions along the basin, drop a bit of vinegar into depression and clean it out with a brush.
3. Rinse the basin with clean water.
How to clean the White Dust & Anti-Microbial Filter:
1. Filter is the Ceramic Ball inside which can soften and purify the water.
3. Put some white vinegar into a glass. Soak the filter in the vinegar for about 10 minutes.
4. Remove the filter from the glass and shake it several times.
5. Clean and rinse the filter once again with fresh water.
We recommend the following:
1. Use cold boiled water or distilled water.
2. Clean the transducer, water tank and basin unit every week.
3. Change the water in water tank more often to keep it fresh.
4. Make sure to pull out the water from the water tank and dry the water basin before you store the unit unused for a long period of time.
5. Clean the whole unit and make sure that all parts of the unit are dried completely if not using for longer period of time.
1. If you are not going to use the humidifier for a long time, make sure that all its parts are dry, including the water basin.
2. Do not store the unit with water in the water tank and in the water basin.
3. Clean and dry the filter-cartridge before taking it away for storage. Keep the filter-cartridge in a cool darkened place
4. Keep the humidifier away from children in a dry cool place.
PUREMATE
English 5
