Press the Power button or press the on/off button on the remote control to turn on the unit.
Note: The timer will start to count down from this point.
The unit default time is preset to 30 minutes. To adjust the time by press +/- button, it can be
adjusted while the unit is working.
Note: Hold the buttons down to cycle through the modes. This cycle function is not available
on the remote control.
Infrared LED Lights
A series of infrared LEDS can be activated by turning on the switch located on the right-hand side of the
machine. The penetrating infrared light is passively absorbed by the soles of the feet. The light energy does
not heat the foot plate.
OPERATING INSTRUCTIONS
NOTE: This unit does not vibrate.
English | 3
IMPORTANT: The circulation promoter will not function unless both feet are
placed on the foot plates.
Relax into a seated position. Place your clean and dry feet without any socks on the
foot plates.
