13
WarraNTy
Edition of 0
9
.12.2020
07
3. The Ethernet PLCM is pinged, but is not available from the configuration window.
Possible causes: a firewall or some other program blocks traffic between a PLCM controller
and a computer.
Explanations: to detect all PLCM devices in LAN, the UDP broadcast queries are used.
Some programs in OS Windows, for example, a firewall or anti-virus software, can block such
network queries.
Solution: find and disable the program blocking the traffic.
4. How to create your own screen set in Mach3.
If you wish to create your own screen for operation with THC1, the necessary controls are
listed below: DRO #1332 – required arc voltage, V DRO #1333 – current (measured) voltage, V
DRO #1334 – control delay after torch fire, DRO #1336 - maximum voltage tolerance, V UserLED
#1326 – attribute of ARC OK signal use.
Warranty service life is 12 months from the purchase date.
The warranty is only preserved if operation and scheduled maintenance conditions are
observed.
1. General provisions
1.1. If the goods is purchased as component parts, Seller shall guarantee operability of
each component part individually, but is not responsible for the quality of their joint operation
(incorrect selection of component parts. In case of any questions you can consult the company’s
specialists).
1.2. Seller does not provide any warranty for compatibility of the purchased goods and the
goods possessed by Buyer, or purchased by them from any third parties.
1.3. Specifications and configuration of the product can be changed by manufacturer without
prior notice due to continuous technical improvement of the products.
2. Conditions for access to warranty service
2.1. The goods is accepted for warranty service in the same configuration in which it was
purchased.
3. Warranty service procedure
3.1. The warranty service is carried out by testing (checking for) the declared malfunction
of the product.
3.2. The warranty service is carried out if the malfunction is confirmed.
4.The warranty does not cover glass, electric lamps, starters and consumable materials, and:
4.1. any goods damaged due to improper transportation and storage conditions, incorrect
connection, off-design operation, or in conditions not stipulated by the manufacturer (including
temperature and humidity beyond recommended range), damaged due to effect of exterior
circumstances (power supply voltage surges, natural disasters, etc.), and mechanically or
thermally damaged goods.
08
Warranty
8
8
