4. Select Plugin control -> PLPendant control. Control panel setting window will open as shown on
fig.6.
Fig. 6. Control panel setting window
5. There is drop-down list of all detected control panels at the bottom on window.
Control panels are distinguished by serial numbers specified in parentheses. Select the required device.
* - If you can not select the device (list is empty), this means that Windows Firewall blocks access to
control panel. You should either add MACH3 to firewall exceptions list or disable firewall.
6. “Update” button is used for repeated search of devise in network;
“Set address” button calls window (fig.7) for changing of control panel network settings.
Fig. 7. Change of control panel network settings
-5-
