PureLink PT-MA-HD88-C, Руководство пользователя

Страница: 8 / 24

www.purelink.de 8
7. Installation
—
Connect all sources to HDMI Inputs on the 8x8 HDMI over CAT.X matrix master PT-MA-HD88-C.
—
Connect each CAT.X output port on the PT-MA-HD88-C to respective CAT.X input on the remote
receiver PT-E-HD10.
—
Connect each HDMI output on receiver to HDMI displays.
—
Connect IR blaster to the PT-MA-HD88-C and direct the IR blaster to point towards the built-in IR
receiver of the HDMI source devices.
—
Connect the +12V 5A DC power supply to the PT-MA-HD88-C and +5V 2A DC power supply to the
receivers
—
Power on all HDMI sources and displays.
—
Dial the 8-level rotary control switch to adjust the HDMI signal level until the picture and sound are
clear. It is recommended to dial from weakest to strongest to find the optimal visual experience
8. EDID LEARNING
The EDID learning function is only necessary whenever you encounter any display on the HDMI output port
that cannot play audio and video properly. Because the HDMI source devices and displays may have various level
of capability in playing audio and video, the general principle is that the source device will output the lowest
standards in audio format and video resolutions to be commonly acceptable among all HDMI displays. In this
case, a 720p stereo HDMI signal output would be probably the safest choice. Nevertheless, the user can force the
matrix to learn the EDID of the lowest capable HDMI display among others to make sure all displays are capable
to play the HDMI signals normally.
There are
eight embedded default EDID as below,
—
Full-HD(1080p@60)-24bit 2D & 2ch
—
Full-HD(1080p@60)-24bit 2D & 7.1ch
—
Full-HD(1080p@60)-24bit 3D & 2ch
—
Full-HD(1080p@60)-24bit 3D & 7.1ch
—
HD(1080i@60)(720p@60)-24bit 2D & 2ch
—
HD(1080i@60)(720p@60)-24bit 2D & 7.1ch
—
Full-HD(1080p@60)-36bit 2D & 2ch
—
Full-HD(1080p@60)-36bit 2D & 7.1ch