PureLink PT-MA-HD88-C, Руководство пользователя

Страница: 7 / 24

www.purelink.de 7
6. IR Pass-through
IR Extenders
IR Blaster IR Receiver
IR Sockets
PT-MA-HD88-C
All IR Out: The default location for IR blaster to transmit all IR command signals received from any of the
four remote receivers to all of the HDMI sources.
IR BLASTER 1-8: IR blaster connected here can only transmit IR command signals from the remote receivers
that are setting at respective input channel from 1 to 8.
System IR: Receives IR commands from remote control
PT-E-HD10
IR BLASTER: IR control on individual display device
IR RECEIVER: IR receiver connected here can receive all IR command signals from the IR remote controls of
PT-MA-HD88-C and all other HDMI source devices.
CAUTION!
Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please check carefully
before plugging in the IR extender to the respective IR sockets. Warranty will not cover the damage.
Definition of IR Earphone Jack
IR Blaster IR Receiver
You can buy any IR extension cables in the market that are compatible to the definition of the IR sockets for the
matrix if necessary for replacement use. However, IR cables longer than 2m (6-ft) may not work.