User Manual
PT-E-HD60
DIP Switch Position
TX & RX
Description
PIN#1
ON [
]
As an USB Host (USB Type-mini-B port)
OFF [
]
As an USB Device (USB Type A port)
PIN#2
ON [
]
TxD: The 2nd pin of RS-232, which is in charge of sending data
RxD: The 3rd pin of RS-232, which is in charge of receiving data
OFF [
]
TxD: The 3rd pin of RS-232, which is in charge of sending data
RxD: The 2nd pin of RS-232, which is in charge of receiving dat
PIN#3
ON [
]
Firmware Update mode
OFF [
]
Working mode
* DIP Switch Position (TX/RX)
8. IR Pass-Through
IR Extenders
IR Sockets
IR Blaster
IR Receiver
IR BLASTER:
plug in the IR blaster to emit all IR command signals received from the IR receiver from the other end to control
the devices corresponding to the IR signals.
IR RECEIVER:
plug in the IR receiver to receive all IR command signals from the IR remote controls of the corresponding devices.
CAUTION
Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please check
carefully before plugging in the IR extender to the respective IR sockets. Warranty will not cover the
damage.
9
