User Manual
PT-E-HD60
3
•
Supports HDMI Deep Color, full 3D & 4K2K@60 4:2:0 8bit (HDBaseT2.0 technology)
•
Extends the transmission up to 100m (330ft) from the HDMI source at Full HD 1080p 48-bit and 80m (264ft)
at 4K2K@60 4:2:0 8bit
•
Supports PoC (Power over Cable) which can power extender either from TX or RX with single power supply.
•
Supports ARC on transmitter & receiver unit
•
HDCP & EDID Bypass
•
CEC support
•
Auto signal equalization
•
USB2.0 over Cat.5/5e/6 cable transmission
•
Analog audio over Cat.5/5e/6 cable transmission from transmitter to receiver
•
Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission
•
DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
•
Supports full frequency IR signal from 20KHz to 60KHz
•
Bi-directional IR path-through
•
Full Duplex RS-232 control up to 115,200 bps through connector
•
Integrated port for LAN/ network device
•
Wall mounting housing design for easy and robust installation
3. Features
The PT-E-HD60 HDBaseT 2.0 Extender with RS-232, Bi-directional IR, Ethernet, PoC & USB2.0 boosts up your vi
-
deo/audio transmission distance up to 100m (330ft) in HDTV 1080p with 48-bit color depth or 80m (264ft) at
4K2K@60 4:2:0 8bit. PT-E-HD60 also supports the most advanced 3D video format complaint with HDMI spe
-
cification and therefore guarantees the highest 3D video compatibility in the market. With single cost effective
Cat.5/5e/6 cable, users can readily extend HDTV sources from DVD players, Blu-ray Disc player, PS3, PC, and any
other kinds of sources compliant with TMDS to distant display monitors including HDMI or DVI enabled TV sets or
LCD PC monitors. With the advanced design for the latest HDMI technology, deep color video, DTS-HD or Dolby
TrueHD audio, and HDCP support and compatibility are all further insured. This flexibility makes HDCP compliant
DVD players or PS3 transmit utmost high quality video and audio with a greater distance at the minimal cost, when
integrating several components apart. In addition, PT-E-HD60 is also equipped with bi-directional IR pass-through
path, USB2.0 and RS-232 serial port control. These bonus features allow users to boost IR control distance up to
100m (330ft) through only single Cat.5/5e/6 cable including HDMI signals. In addition, serial port and USB2.0
offer the convenient path for interactive application, such as touch panels. In addition, PT-E-HD60 also supports
PoC (Power over Cable) which can power both units from TX or RX with power supply.
The PT-E-HD60 includes two units: transmitting unit PT-E-HD60-TX and receiving unit PT-E-HD60-RX. The trans
-
mitting unit is used to capture the input HDMI / DVI signals with control packets. The receiving unit is responsible
for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. PT-E-HD60 offers the
most convenient solution for digital signage with long distance A/V transmission path, and with 10G transmission
bandwidth ready, PT-E-HD60 is ready for your next HDMI generation and applications!
2. Introduction
