PureLink
iCON-10W 10 Button Controller User Manual V1.0
5
Installation
The iCON-10W can be powered from a network switch or PoE injector that satisfies the 802.3af
PoE standard. Alternately, the iCON-10W also accepts 12 VDC power at the rear panel
Phoenix connector with the supplied AC adapter.
The iCON-10W occupies a one gang box and is compatible with decora wallplates.
With a power draw of 1.3 watts, thermal performance is negligible at ~ 4.4 btu.
Programming
The
default address
of the iCON-10W is 192.168.1.254.
The keypad provides a built-in web UI to setup devices and configure commands, as well as configure network
settings of the keypad and acquire system information. The web UI is accessible through browsers such as
Chrome, Firefox, Safari, Opera, IE10+, etc.
Once the keypad is powered via Poe or local power adapter, connected to the network, and your
programming laptop/tablet is in the same subnet and connected to the same network.
