PureLink DTE RX, Руководство пользователя

Страница: 7 / 10

PureLink by Dtrovision
7
Installation and Connection Instructions
1. Turn off both the video source and the display before connecting any cables.
2. Connect CATx cable between the DTE transmitter and the DTE receiver.
3. Connect DVI cable between the source and the DTE transmitter AND the DTE
receiver and the display.
4. Connect the power supply unit to DTE transmitter and DTE receiver module.
5. Turn on Display.
6. Turn on Video Source.
How to terminate CATx cable
DTE was designed to conform to TIA/EIA-568-B standard. Please ensure that each PIN
layout of DTE transmitter and DTE receiver are corresponding with the picture below
before connecting the cable. Please note that CAT5e or above level cable enables to
deliver better video quality and longer distance.
For HDBaseT

For 10/100Mbps Ethernet

Pin TIA/EIA-568B
Wire color
Digital RGB
1 Orange/ White DATA0 +
2 Orange DATA0 -
3 Green/ White DATA1
4 Blue DATA2 +
5 Blue/ White DATA2
6 Green DATA1 -
7 Brown/ White DATA3
8 Brown DATA3 -
Pin TIA/EIA-568B
Wire color
Digital RGB
1 Orange/ White RX +
2 Orange RX -
3 Green/ White TX +
4 Blue N/C
5 Blue/ White N/C
6 Green TX -
7 Brown/ White N/C
8 Brown N/C