3
PUREIT ADVANCED PRO MINERAL RO+UV
PURIFIER'S ADVANCED PURIFICATION
PROCESS
INSTALLING YOUR PUREIT ADVANCED
PRO MINERAL RO+UV PURIFIER
1.
The purifier should be installed by a trained Pureit technician.
2.
It can be wall-mounted or used as a table top purifier.
3.
The purifier should be placed in area which is free of ants/insects/other pests.
4.
The purifier should be placed close to the plumbed inlet connection
(not more than 2 metres).
5.
Do not install the purifier above any electric socket.
6.
Avoid sharp bends to the pipes of the product.
7.
Do not use an extension cord.
8.
Before installing the purifier please check the inlet pressure.
9.
Make sure you test the input water TDS (Total dissolved salts) before installing the
purifier. The maximum input TDS should not exceed 2000ppm.
10. Do not connect the purifier to any hot water tap.
11. Please do not terminate the reject line tubing directly into the drainage (keep it
hanging over the drainage).
12. Do not place the unit where it will be exposed to freezing and/or direct sunlight
and ensure there is enough ventilation.
1. Pre-Sediment Filter
Removes fine and coarse particulate impurities/dirt and improves the life of the Carbon Filter.
2. Pre-RO Carbon Filter
Removes chlorine and organic impurities like harmful pesticides. It also absorbs bad taste
and odour causing organic compounds from water.
3. Mini Filter
Filters water further to ensure removal of ner particulate impurities.
4. RO Membrane
Removes dissolved salts, hardness, pesticides and heavy metals like arsenic, lead and
mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts.
5. UV Chamber
Acts as an additional stage of purification to further inactivate bacteria, virus and parasites to
deliver safe water.
6. Post-RO Carbon Filter
This level of purification acts as a polisher and enhances the taste of purified water.
This is a graphic representation of filters
1
2
3
4
5
6
