©2017 PureGear | PureSwitch Manual
Specifications
Electrical Specs
PureSwitch
®
Model 06158PG
Input: 100VAC-120VAC ~15A 60Hz
Output AC: 100VAC-120VAC ~15A 60Hz
Output DC: USB 5VDC / 2.1A
Operating temperature: 0-40
°
C
Wi-Fi specs
Hardware: 88W8801 B0
Firmware: W8801-B0, RF87xx, FP76, 14.76.36.p70
Operating System: iOS: FREERTOS, version: 7.0.2
Frequency: 2.4GHz
Connectivity:
• IEEE 802.11 b/g/n Smart Energy Module
• WPA – Personal
• WPA2 – Personal
R.F Power rating: 0.177W
Certification ID: WFA61263
CAN ICES-3 (B)/NMB-3(B)
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
FCC statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Caution
Do not plug in any product except for power supply cord (Max. 1.5m length with 1.0mm square).
Not recommended for use with power strips.
Use of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively,
and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Apple, iPhone, iPad, iPod touch, and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. HomeKit is
a trademark of Apple Inc.
