PUREGAS, LLC
P550W2 Series Air Dryers User’s Guide
Page 31 of 99
P012226 – Rev. F
8.7 Adjusting & Resetting Dryer Set Points
Dryer Set Points are simply limits programmed for a specific reading. Once this limit
is reached (or exceeded) this results in an alarm for that reading. Each of these set
points is factory programmed with a default value based on typical usage of the air
Dryer. Many of the set points for Dryer alarms can be modified to levels more
closely based upon your specific application.
NOTE
: Reference Appendix Section 14.2 for Limits and Defaults.
•
Press the Up (
) Arrow Button to access the Set Point Adjust screens.
•
Press the Up (
) & Down (
) Arrow Buttons to navigate through the available
Set Point Adjust screens.
•
To change a specific Set Point:
8.7.1
High Flow Rate Alarm Set Point
(default setting is 14.0 SCMD) –
8.7.1.1
Press the Right (
)
Arrow Button to access the
Change Value Screen.
8.7.1.2
Press the Right (
) &
Left (
) Arrow Buttons to
move the underscore
beneath the digit to change.
8.7.1.3
Press the Up (
) & Down (
) Arrow Buttons to change the value of
the selected digit.
8.7.1.4
Press the Right (
)
Arrow Button until the
underscore disappears.
8.7.1.5
Press the Right (
)
Arrow Button until the underscore appears under the correct setting
(
YES
or
NO
).
8.7.1.6
Press the Up (
) Arrow to confirm. This will lock in the new setting
value.
