2
3.
❏
Turn-Off Cold water supply via your Shut-Off Valve (
Angle Stop
) or water supply to
whole house. Note:
It may be necessary to turn off the hot water supply as well.
4.
❏
Disconnect your existing connection(e.g.
Riser Tube
) from the cold water
Angle Stop
.
5.
❏
Connect the provided John Guest
®
Angle Stop Adapter Valve
to the cold water
Angle
Stop,
see example pictured below. Note:
Applying Plumbers Tape on the threading can
help with any leaks
.
a.
Reconnect your Existing
Riser Tube
to the
Angle Stop Adapter Valve
.
b.
Position unit where you’d like, and ensure that the blue filter faucet and red water
input tubing will adequately reach the unit. Hang the filter system under the sink at
least 4” above floor
(to allow for removal of chambers for cartridge changes)
.
c.
Push-in the available end of the
¼
”
Red
“IN”
tube into the
¼
” output port of the
Angle Stop Adapter Valve
until it “pops-in” as far as it can go.
(If additional filtered water output connections are desired, e.g. fridge-water
Supply/Ice-maker connections, etc… please ask us about adding a
¼
” 2-way
splitter to your unit’s output port).
6.
❏
Install the provided dedicated faucet into the sink. (See instructions on next page).
** To Disconnect
the tube from
connection:
!
Angle Stop
(cold water)
!
Angle Stop Adapter Valve
Riser Tube
"
Red “IN” Tube
"
