1
Thank you, and Congratulations
on your purchase of
The
PureEffect
TM
ULTRA-UC
Water Filtration
System Featuring: Our All-Natural FluorSorb
TM
Anti-Fluoride, Wide-Spectrum Anti-Radiation,
SuperBlock
TM
Anti-Chemical, KDF55
®
Heavy Metal Filtration and Natural Alkalization Technologies.
INSTALLATION INSTRUCTIONS
IMPORTANT! - BEFORE YOU START:
-Ensure there is a pressure regulator installed and is in proper working order before
proceeding.
At no time should the filter housings be subject to more than 75PSI
(most
common PSI range is between 40-75).
You should contact a licensed plumber if you are not
able to check this on your own. Excessive water pressure could cause damage to the system
and water to leak out. Failure to follow proper installation instructions voids all
warranties and liabilities.
- The system should be installed where it is protected from freezing temperatures and
direct sunlight. Do not install the system where if would cause damage if leakage occurred.
1.
❏
Unpack your system, remove and set aside cartridges
(by unscrewing chambers)
and
inspect system for any transportation damage. If damage is found, please contact us right
away.
2.
❏
Find the individually wrapped
White Elbow,
also find the
RED
tubing with the
second white elbow attached. Locate the words “
IN
” and “
OUT
” on the unit’s water
connection ports. Screw the elbow with
RED
tube into the “
IN
” port and the additional
elbow, into the “
OUT
”.
Note: The white elbow attached to the
red
tubing is outfitted with
a built-in flow restrictor to ensure optimal 0.5gpm water flow, which helps for greater
contaminant absorption
.
Please ensure this elbow is always connected on the input side
of the unit, even if you ever change tubing.
Customer Support:
Tel: 1-347-492-4014
Email:
www.PureEffectFilters.com
Red
Input
Blue
Output
