FERRULE
COAXIAL
CABLE
CONNECTOR
ASSEMBLY
10:
Insert the coaxial cable into the coaxial connector until the wires of the center conductor are visible through the M3 set
screw hole.
NOTE:
Ensure that the split in the ferrule is aligned 90° from the M4 set screw (see inset).
I
COAXIAL
CABLE
10
CONNECTOR
ASSEMBLY
2MM ALLEN
WRENCH
12
CONNECTOR
ASSEMBLY
COAXIAL
CABLE
M4 SET
SCREW
11:
Use the provided 1.5mm Allen wrench to replace and
securely tighten the M3 set screw.
1.5MM ALLEN
WRENCH
11
CONNECTOR
ASSEMBLY
COAXIAL
CABLE
M3 SET
SCREW
J
12:
Use the provided 2mm Allen wrench to securely tighten the
M4 set screw until it squeezes the wire ferrule tightly to the
coaxial cable.
K
10
13:
Replace the coaxial connector cover and tighten into
place.
L
13
COAXIAL
CONNECTOR
COVER
COAXIAL
CABLE
M
14:
Connect the red wire of the coaxial connector to the
+24VDC power supply wire with a wire nut.
15:
Connect the black wire of the coaxial connector to the
-24VDC power supply wire with a wire nut.
16:
Place all connections inside the junction box.
COAXIAL
CONNECTOR
15
14
16
JUNCTION
BOX
3
WIRE NUT
WIRE NUT
