Installation tips
2) Place the unit in an area
where the temperature
levels will not fall bellow 5ºC
(41ºF) There is a possibility
the coils will collect frost at
temperatures that are under
5ºC (41ºF), which may result
in low performance.
3) Ensure the pre filter is clean. Place in right
position the HEPA&Carbon filter.
1) Do not block or restrict
the airlfow around the unit. Make
sure the air inlet exhaust grills are
not obstructed. Allow 20cm of
clearance around the unit and
40cm above.
4)) Place unit in vertical operating position
and allow 2 hours before initial use in
order to avoid malfunctions.
5)) Before the initial operation, please
check, if the water level switch,
located within the water bucket
area, is in the right position.
EN
8
