Puredry PD 12L Design, Руководство пользователя

Страница: 18 / 42

l
All house exits (windows doors etc) where the dehumidifier is operating, should be shuted.
l
Room temperature is below the advised operational range.
l
There is a kerosene heater or something giving off water vapor in the room.
l
The room that the device is placed is bigger than suggested.
l
The humidity level is too high.
The unit makes a loud noise when operating
l
The air iflter is clogged.
l
The device is tilted instead of being in an upright position.
l
The floor surface is not flat.
Frost build up on coils
l
This is normal. This unit is supplied with an Auto defrost feature.
Drain hose water leakage
l
Check the correct installation of the drain hose.
l
Check for any blockage or damage of the drain hose.
Understanding Error and Protection codes
Error Codes:
CL - When the room temperature is below <5°C, the code CL appears. At this state the
compressor does not work, but the other functions works normally.
LO - When the relative humidity is below 20* RH, the code LO appears. At this state
the compressor does not work, but the other functions works normally.
HI - When the relative humidity is above 95% RH, the code HU appears. At this state
both the compressor and the other functions works normally
NOTE: All the pictures in the manual are for explanatory purposes only. The actual
shape of the unit you purchased may be slightly different, but the operations and
functions are the same.
In the event of any of the above-mentioned malfunctions, turn
off the unit, and check for any obstructions. Restart the unit, if
the malfunction persists, turn off the unit and unplug. Contact
the manufacturer or a qualified technician for service.
CH- When the room temperature is above >38°C, the code CH appears. At this state the
compressor does not work, but the other functions works normally.
E1- This error code appear when the temperature has been damaged. Turn off the
product and contact the technical department of the company immidiately.
E2- This error code appear when the humidity sensor has been damaged. Turn off the
product and contact the technical department of the company immidiately.
1 8
EN